Devices that are indispensable in today's day and age, where energy conservation is a popular topic. The purpose of sockets with remote control is to operate home appliances such as lamps, fans other electrical devices that we can not reach to turn on or off. A set created for convenience, so that you can turn on and off by remote control any device connected to the outlet, even those in the other room or behind furniture. In addition, the sockets allow you to turn off devices that use energy even during sleep mode (consumer electronics, household appliances). The controlled outlet can even be behind a wall, glass, the remote control does not need to see the outlets.
PROGRAMMING: - Open the cover of the remote control and place two AAA 1.5V batteries inside. - Then press On/Off to check if it works. - If the LED on the remote control lights up, the batteries are working properly. - Plug the outlet into power, the LED indicator will start flashing. - Enter channel selection mode on the remote control. Note: The outlet will exit channel selection mode after 29 seconds of inactivity. On the remote control, press A-On, B-ON, C-ON or D-ON to match with the socket. Once correctly connected, the LED indicator will stop flashing. Done - you can now turn the outlet on or off by pressing ON/OFF. Removing a single channel: Disconnect and reconnect the outlet to the power (the led indicator will start flashing slowly in channel selection mode). Then press and hold the OFF button until the LED starts flashing rapidly (about 3-4 seconds), which will indicate that the selected channel has been cleared. After clearing the channel, the receiver will return to the selection mode. The total time for channel selection is 29 seconds.. Deleting all selected channels: Disconnect the outlet from power and reconnect (the led will start to flash slowly in channel selection mode) then press and hold the OFF button 'ALL ON/OFF' until the led indicator starts to flash quickly (about 3-4 seconds), which will mean that all selected ON/OFF channels have been deleted. After that, the led indicator will stop flashing
Specification: - Power supply: 230V, 50Hz - Maximum load: 16(2)A, 3600W - Operating frequency: 433.92MHz - Range: about 30m in open space - Remote control batteries: 2pcs AAA 1.5V (included)
Set contains: - Factory new indoor power sockets controlled by remote control 4pcs - 2 remote controls to control the sockets - Batteries for the remote controls - Original manufacturer's packaging
- Random code/coding - 24 bit transmission code using CRC checksums, repetition probability 1 to 16,777,216 - Each remote control can control up to 4 channels (1 ON, 1 OFF, 2 ON, 2 OFF....etc.) (Each channel can control one receiver) - Built-in memory, allows you to remember the code for 10 years - Easy operation, using a convenient remote control - The set uses radio communication, so you can use the set even in separate rooms - Maximum range of 30m in an open area - Low power consumption (Battery life is 2 years) - Very high quality workmanship - The best materials were used to manufacture the sockets - Batteries for the remotes included.
